part number: XSFBB983W super flux led lamp oct 10,2016 xdsb5191 v5-z layout: maggie l. p. 1/3 features high current operation for greater luminous output low power consumption and thermal resistance can be used with automatic insertion equipment rohs compliant attention observe precautions for handling electrostatic discharge sensitive devices benefits: rugged design allows for easy maintenance robust package for optimum reliability typical applications: automotive side markers gaming and entertainment lighting signs and road hazard indicators package schematics notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3. specifications are subjec t to change without notice. absolute maximum ratings (t a =25c) blue (ingan) unit reverse voltage v r 5 v dc forward current i f 30 ma power dissipation p d 135 mw operating temperature t a -40 ~ +85 c storage temperature tstg -55 ~ +85 lead solder temperature [1.5mm below seating plane.][1] 260c for 5 seconds electrostatic discharge threshold (hbm) 250 v blue (ingan) unit forward voltage (typ.) (i f =30ma) v f 3.5 v forward voltage (max.) (i f =30ma) v f 4.5 v reverse current (max.) (v r =5v) i r 50 ua wavelength of peak emission cie127-2007*(typ.) (i f =30ma) p 465* nm wavelength of dominant emission cie127-2007*(typ.) (i f =30ma) d 470* nm spectral line full width at half maximum (typ.) (i f =30ma) 22 nm capacitance (typ.) (v f =0v, f=1mhz) c 100 pf thermal resistance (typ.) r j-pin 180 c/w operating characteristics (t a =25c) part number emitting color emitting material lens-color luminous intensity cie127-2007* (i f =30ma) cd luminous flux cie127-2007* (i f =30ma) lm viewing angle 2 1/2 min. typ. typ. XSFBB983W blue ingan water clear 0.9* 1.195* 1.3* 40 1.luminous intensity is measured with an integrating sphere after the device has stabilized. 2. 1/2 is the angle from optical centerline where the lu minous intensity is 1/2 of the optical peak value. 3.leds are binned according to their luminous intensity. * luminous intensity / luminous flux value and wavelength are in acco rdance with cie127-2007 standards. wavelength cie127-2007* p nm 465* 1.no reflow soldering . 2.a relative humidity between 40% and 60% is recommended in esd-protected work areas to reduce static build up during assembly process (reference jedec/jesd625-a and jedec/j-std-033)
part number: XSFBB983W super flux led lamp oct 10,2016 xdsb5191 v5-z layout: maggie l. p. 2/3 ? blue remarks: if special sorting is required (e.g . binning based on forward voltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters. blue
part number: XSFBB983W super flux led lamp oct 10,2016 xdsb5191 v5-z layout: maggie l. p. 3/3 packing & label specifications terms of use 1. data presented in this document reflect statistical figures and should be treated as technical reference only. 2. contents within this document are subject to improvement and enhancement changes without notice. 3. the product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. user accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. the product(s) described in this document are intended for electronic applications in which a person?s life is not reliant u pon the led. please consult with a sunled representative for special applications where the led may have a direct impact on a person?s life. 5. the contents within this document may not be altered without prior consent by sunled. 6. additional technical notes are available at http://www.sunledusa.co m/technicalnotes.asp xsxxx983x
|
